TW-Mill C- the stationary joinery portal

banner mill c

bild mill c 7

• automatic feed and discharge
• individually programmable cars
• 6-sided machining and central disposal
• unlimited design thanks to open-loop control
• configuration tailored to customer and product

TW-Mill C- the stationary joinery portal

The version TW-Mill C consist of a statinary portal. The TW-Carrier moves along the X-axis, which is interpreted in any length. All TW-Carriers are identical and designed as full servo axis. A drive moves both sides of the car and allows precise positioning.

inside view of the TW-Mill C

Work pieces with a width up to 2000 mm can be clamped automatically in the horizontal plane. In addition also large, curved glulam parts can be positioneded on the carriers.

To avoid a friction during the repositioning of the carriers, the supporing surface can be lowered. Also the arrester and the clamping can be lowered. Like this the TW-Carrier generates a plaine surface so that the work piece can be transported in or out.

TW-Mill C - Inward- and outward transport, central disposal

Particularly interesting is the automatic inward- and outward transport of components. The loading takes place via feed gantries, which suspend the component from robust chains and transfer them further to the chain conveyor of the portal carriage. The components are transported out on solid roller trestles. The portal carriages transfer the components onto these inclined trestles via conveyor chains. The machining of components at all sides is a great advantage of the TW-Mill C, thanks to the spindle working from below. Just like the disposal of scrap wood, which can be resolved centrally in the machining zone.

feed gantries
automatic transport

TW-Mill C - custom production (e.g. Lathe)

Technowood offers flexibility in the machining and in the design of the plant. Company-specific requirements are realized gladly and with great knowledge in the timber, machine and controller sector.

An example of this openness is the lathe, which can be placed e.g. on the portal carriage of the TW-Mill C. Components with a weight of up to 10000 kg and a diameter of 2000 mm can be clamped. When machining very long components, a carriage with a supporting element can be moved in between. This involves a complete NC-axis, which can position the high quality Technowood component.

brochure TW-Mill C

Technowood GmbH
Horb 5
CH-9656 Alt St. Johann
T: +41 (0)71 997 04 00
F: +41 (0)71 997 04 01